lgeywazkqu4qcumxey2jtzuznvkkc7kaqjim3qghwkuxykdkqrea.mx-verification.google.com
705•326•1010 info@quiptec.com

Mold Manipulators

Economical, Simple, Rugged

For over 25 years, the Quiptec Mold Manipulator has provided the modern foundry with an efficient and economical device to lift, rotate, position and close different types of chemically bonded sand molds. Careful attention to design detail has resulted in a rugged, compact production tool. Both manual clamp pad rotation and power clamp pad rotation are available.

Battery Powered

  • An ideal solution when the manipulator needs to be moved freely or when a direct connection to plant power is not possible
  • Comes complete with battery-charging stand
  • Includes a smart DC motor controller with auto time and low voltage shut-off, saving battery life
  • Available in both manual-rollover and power-rollover units

Standard Models

  • For over 25 years, the Quiptec Mold Manipulator has provided the modern foundry with an efficient and economical device to lift, rotate, position and close different types of chemically bonded sand molds. Careful attention to design detail has resulted in a rugged, compact production tool. Both manual clamp pad rotation and power clamp pad rotation are available.

    The following are our standard models, capable of lifting the most common molds. Of course anything can be customized to fit your specific needs.

Manual Rollover

Mold Size
Min – Max
Rotate Radius
Total Height
Weight Capacity
Technical Details
12″
26″
14″
42″
700 lbs
21″
57″
27″
69″
2000 lbs
19″
59″
30″
69″
2000 lbs
16″
38″
22″
51″
2000 lbs
15″
39″
25″
51″
2000 lbs

Power Rollover

Mold Size
Min – Max
Rotate Radius
Total Height
Weight Capacity
Technical Details
19″
52″
32″
71″
2000 lbs
12″
34″
24″
57″
2000 lbs

Models QSR2000-S and -L have an aluminum clamping pad on the non-powered side.

All models listed below have two steel clamping pads:

16″
52″
35″
69″
2000 lbs
18″
48″
32″
69″
2500 lbs
16″
52″
35″
69″
2500 lbs
26″
56″
33″
80″
4000 lbs
30″
60″
40″
120″
6000 lbs
35″
80″
55″
120″
10,000 lbs
72″
120″
48″
130″
15,000 lbs

Standard Models

A complete list of our standard models including dimensions and mold carrying capacities.

Features

  • Mold capacities range from 700 lbs to 15,000 lbs
  • Two-hand operator engagement is required for both “clamp” and “unclamp” functions
  • Even if power to the mold manipulator is cut, the unit continues to apply clamping pressure and is “fail-safe”
  • Battery-powered models are available

Quiptec Mold Manipulators - Stage 1

Lifting and rotating the cope mold face-up for coring and dressing

Quiptec Mold Manipulators - Stage 2

Lifting and rotating the cope mold face-up for coring and dressing

Quiptec Mold Manipulators - Stage 3

Using the mold manipulator to close prepared cope and drag half-molds.

Note how the integral hoist control push-buttons on this unit permit delicate, eye-level closing of the mold.

 

Clamp Pads

Clamp pads can be custom-designed to suit virtually any application. Special adaptors can also be made to suit the handling of flasks.

Variety of Sizes

A wide range of sizes and capacities are available. Custom built transport carts are also available.

Have a Project in Mind?

Let’s Get Building!

Contact Us

39 Paterson Road, Oro-Medonte, ON L3V 0R4 CANADA

705•326•1010

info@quiptec.com